Output shaft torque spec

Guys i have read the sticky and am i seeing this correctly? The two output shafts are torqued to 30ft lbs?
Whtas the torque on the three little input sleve bolts?
03tdi ALH 5speed
Also any of you see a need to get new thermometer flange bolts as i cant see why i need new ones? Thanks for all the help. She is alive today.

If you mean the M6 Allen bolts holding the output shaft flanges to the transmission, they are 18 lb/ft.
If you mean the 6 bolts/side that attach the CV joint to the drive flanges on a manual trans, then they are 30 lb/ft.

Input sleeve bolts...I'll guess at 7 lb/ft but wait till someone confirms this. I don't have the info in front of me.

Did you mean thermostat flange bolts instead of thermometer?
If you did, those do not need to be replaced unless someone fudged them on the last removal. The bolts have a torque of 11 lb/ft.

Yes to flange bolts
And thermostat houseing . Thank you