jokila
Vendor
2011 Tiguan
----------------------------
I thought the proper way to reset the number of paired remotes is to go to 46-Cent Conv.
Adaptation-10
Channel 00
Save.
This process does not reset the number of remotes. It will be at 6 or 7 at times. I even tried to set the module to 0 remotes on Channel 01 but the least number it would go to is 1. Sometimes in the process of adaption the keys I would get an error that module was unavailable and "are the doors unlocked". Never got the flasher indicator the key was programmed.
Eventually it did take a programming. The logs shown below would appear but the key would not reprogram.
Adaptation Channel 000:
Stored value ---
Test value 000
Note: SAVE
Ch. 00 Resets
All Factory
Defaults
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 09,5K0 937 085 L,channel 0,adapted from,---,to,000,
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Here are some of the errors:
00907 - Intervention load Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 140
Mileage: 124442 km
Time Indication: 0
Date: 2017.14.26
Time: 21:46:02
Freeze Frame:
Term 15 On
Voltage: 11.85 V
ON
ON
OFF
OFF
OFF
01179 - Incorrect Key Programming
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 4
Fault Frequency: 1
Reset counter: 140
Mileage: 124442 km
Time Indication: 0
Date: 2017.14.26
Time: 21:44:44
Freeze Frame:
Term 15 On
Voltage: 11.90 V
ON
ON
OFF
OFF
OFF
----------------------------
I thought the proper way to reset the number of paired remotes is to go to 46-Cent Conv.
Adaptation-10
Channel 00
Save.
This process does not reset the number of remotes. It will be at 6 or 7 at times. I even tried to set the module to 0 remotes on Channel 01 but the least number it would go to is 1. Sometimes in the process of adaption the keys I would get an error that module was unavailable and "are the doors unlocked". Never got the flasher indicator the key was programmed.
Eventually it did take a programming. The logs shown below would appear but the key would not reprogram.
Adaptation Channel 000:
Stored value ---
Test value 000
Note: SAVE
Ch. 00 Resets
All Factory
Defaults
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 09,5K0 937 085 L,channel 0,adapted from,---,to,000,
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Here are some of the errors:
00907 - Intervention load Management
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 1
Reset counter: 140
Mileage: 124442 km
Time Indication: 0
Date: 2017.14.26
Time: 21:46:02
Freeze Frame:
Term 15 On
Voltage: 11.85 V
ON
ON
OFF
OFF
OFF
01179 - Incorrect Key Programming
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 4
Fault Frequency: 1
Reset counter: 140
Mileage: 124442 km
Time Indication: 0
Date: 2017.14.26
Time: 21:44:44
Freeze Frame:
Term 15 On
Voltage: 11.90 V
ON
ON
OFF
OFF
OFF
Last edited: