All Doors unlock \with 1 push of the remote

A

auld

Veteran Member
Joined
May 9, 2004
Location
Bedford , Nova Scotia
All Doors unlock \\with 1 push of the remote

I know I am blind, and I did search the forum, but does anyone have the routine to change the sequencing so that a single push of the remote will unlock all doors...?

Thanks in advance for your input.

sean
 
dieseldorf

dieseldorf

Top Post Dawg
Joined
Oct 11, 2000
Location
MA
TDI
ex- 1996 wagon, ex-2000 Jetta
Re: All Doors unlock \\with 1 push of the remote

It can be done but it's not totally obvious. I have my Jetta set that way. IIRC, you need to change the s/w coding and those values are a bit different between model years.
 
dieseldorf

dieseldorf

Top Post Dawg
Joined
Oct 11, 2000
Location
MA
TDI
ex- 1996 wagon, ex-2000 Jetta
Re: All Doors unlock \\with 1 push of the remote

<font color="red"> Selective Unlocking: </font>


[Select]
[46 - Cent. Conv.] (35 - Cent. Locking for manual window cars)
[Recode - 07]
Write down the existing coding for future reference.
Enter 5-digit code from below
[Do It!]



Look at the existing Soft. Coding. If you have selective unlocking (press the unlock button on the remote once to open the driver's door, twice to open all the doors) the last digit of your coding should be an even number. To make all doors unlock, add 1 to the coding.

So, if you have a 2-door 2002 GTI that is coded for selective unlocking (00064) add one to make it 00065 so that all doors unlock with one press of the unlock button.
Click to expand...
 
A

auld

Veteran Member
Joined
May 9, 2004
Location
Bedford , Nova Scotia
Re: All Doors unlock \\with 1 push of the remote

Thanks Dieseldorf, will run out and try it now, once again the members from this site come through.

Sean
 
You must log in or register to reply here.
Top