Additional CCM coding and configurations with VDS Pro

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
So, care to share any coding / configuration differences that you may know of between Golf (mechanical release), Jetta (electric release - which you said can be remote released), and B5.5 Passat wagon (which VW didn't grant remote release to)?

I'm not asking anybody to plow thru the numbers for me - I just need a few CCM dumps to compare against (not unlike what Miguel was looking for in the earlier days of this thread.)

(edit)
Not to sound brusque, but...
"It can't be changed" is what I was told last winter, when I inquired (elsewhere, Passat community) about the tailgate "logic" (the always-locked gate that we got in NA.)
That's been proven incorrect - I changed it on mine. :) So, looking to figure out (not necessarily be told) how to do this.
 
Last edited:

jetta 97

Vendor
Joined
Dec 25, 2008
Location
Dallas (McKinney) ,TX ,USA
TDI
2 X Jatta MK5 2006
Like I told you it is not possible to make Wagon Tail gate put out.
It has Door handle on back.

Jetta or Passat Sedan do not have Door handle. Go and find Jetta or Passat sedan and you will see what I am telling you.

I think only way to do this to modified and install mechanism form Sedan.
 
Last edited:

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
Like I told you it is not possible to make Wagon Tail gate put out.
It has Door handle on back.
No, no it does not. B5.5 wagons have a fully electric tailgate release. Nothing back there but a microswitch to touch. The B5 was mechanical. I am absolutely certain of this - I've used it many, many times to open the damned tailgate.

Jetta or Passat Sedan do not have Door handle. Go and find Jetta or Passat sedan and you will see what I am telling you.

I think only way to do this to modified and install mechanism form Sedan.
That still wouldn't take care of the coding part.....
 

SilverGhost

Veteran Member
Joined
Mar 25, 2005
Location
Back in So Flo - St Lucie
TDI
'05 Golf - totaled :(, wife's '13 Beetle - buy back, TDIless
A thought that occurred to me - Euro Jetta (Bora, MkIV) unlocked the trunk but you had to open it with the micro switch, where as the NAR Jetta just popped open. That is probably a very good (best?) way to find exactly what bits are different for what you want.

Jason
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
That's more like what I was thinking.
But, what I need is CCM data to compare against. I don't have a Jetta to look at. ;)
 

SilverGhost

Veteran Member
Joined
Mar 25, 2005
Location
Back in So Flo - St Lucie
TDI
'05 Golf - totaled :(, wife's '13 Beetle - buy back, TDIless
Well, you are going to need some European friends to give you dumps as well as someone state side. Hopefully some of them are watching and can help out.

Jason
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
That, sir would be why I've made my request here (in this thread), at PassatWorld, the Vortex, and at UKPassats.
The net has been cast wide. :)
 

sasch

New member
Joined
Oct 6, 2016
Location
Bulgaria
TDI
Skoda O1 1.9 ALH
Hi guys i'm new to the forum but i have read all of this thread with big interest :) i have an issue with the CCM the previous owner fitted the car with 1C0959799A (i think this was not the original because the car didn't have T15 only T23 and T24) the radio module on it is somehow not working it does not accept remotes :( so i bought exactly the same module from car like mine(skoda octavia variant TDI) with working radio. The problem is that the donor car had electronic trunk lock and mine have mechanical so the new CCM doesn't lock and unlock the tailgate which values should i change in the CCM in order to have the lock/unlock signal to the tailgate?

PS: sorry for the english :)
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
sasch, I think that you're going to need to dump both CCMs, and compare the data between them.
Much, much earlier in the thread, Miguel did, at least, identify where in all of the code the main configuration registers are. So, that narrows down where to look.

Alternatively, dump both CCMs. Write your old CCM dump to the new one.
 

sasch

New member
Joined
Oct 6, 2016
Location
Bulgaria
TDI
Skoda O1 1.9 ALH
@cuppie i found the adresses to modify in one UK thread and copied them from the old CCM to the new and now it works perfectly also i bought key fob with three buttons(on octavia mk1 they come only with 2) and button for the trunk works as intented :) now i will continue to the next challenge to install the T15 connector because i didn't have one before so i bought it from local dealer but i'm still searching for the proper connections which should be made :)
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
sasch,
I don't suppose you could share just what you changed on yours? I'm looking for data points to get remote release on my NAR B5.5 wagon tailgate (electric release) working.
Thanks!
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
Much earlier in the thread, Miguel (madelgado) had suggested to someone, on this subject, that changing 04361-04363 to 66 (binary 01 00 00 10) from 67 (bin. 01 00 00 11) would enable this (for reference, 194= 11 00 00 10). So, I tried it. Didn't help. Changed it back.

Another post (from Lucas) suggested that setting bit 1 in 04367-04369 to '0' would enable this. So, I checked there, and... decimal value of 34 = binary 00 10 00 10 (in other words, bit 1 is already at 0.)
Same post (post# 450), he said that setting 04361, bit 0, to 0 did the trick. So, back to Miguel's earlier post (port# 10), I again set 04361-04363 to 66, and... just like earlier, I cannot open the tailgate remotely. Can still open it when all doors are unlocked, can still open it on a locked car by holding the 'trunk' button on the remote and then pressing the tailgate pad (just like stock.)
Quoting myself for reference....
I realized earlier today that I was reading the Matrix backwards, those months ago. :oops: My current 04367-04369, bit 1, is actually set to 1, not 0. So, that's on the list of "things to try."
I also have a note (not on me ATM) about bit 1 (I think it was) of 04361-04363 affecting tailgate / trunk / boot operation, too.
I may have a chance to play with this tomorrow, or maybe later in the week. Will expand on these thoughts after I've tried it. :)
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
GOT IT!!!!!!! :happydance:
Bytes 04361-04363, bit 1: Tailgate operation via remote (1: disabled; 0: enabled)
AND
Bytes 04367-04369, bit 1 (1: disabled; 0: enabled.)

Comically, that information is straight from post#450 in this very thread. I just either overlooked it, or mis-read it months ago, and forgot about it.
After this weekend's re-read of a lot of the thread, found that, and said "worth a try."

So, to put all of the B5.5 Passat wagon (NAR) bits in one single post....
04352-04354, change bit 6 from 0 to 1, and
04370-04372, change bit 1 from 1 to 0. These changes will give you a tailgate that is "unlocked" with the rear doors (just like a ROW B5.5 wagon.)

At all who have contributed on this, much thanks. Special thanks to Lucas, for that post from, oh, 6+ years ago with the last needed bits. :)
And, @ jetta ,97: Neener-neener, sir. :p
 

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
GOT IT!!!!!!! :happydance:
Bytes 04361-04363, bit 1: Tailgate operation via remote (1: disabled; 0: enabled)
AND
Bytes 04367-04369, bit 1 (1: disabled; 0: enabled.)

Comically, that information is straight from post#450 in this very thread. I just either overlooked it, or mis-read it months ago, and forgot about it.
After this weekend's re-read of a lot of the thread, found that, and said "worth a try."

So, to put all of the B5.5 Passat wagon (NAR) bits in one single post....
04352-04354, change bit 6 from 0 to 1, and
04370-04372, change bit 1 from 1 to 0. These changes will give you a tailgate that is "unlocked" with the rear doors (just like a ROW B5.5 wagon.)

At all who have contributed on this, much thanks. Special thanks to Lucas, for that post from, oh, 6+ years ago with the last needed bits. :)
And, @ jetta ,97: Neener-neener, sir. :p
Hi, having some problems with my golf variant 2000 after a CCM change to a 1co959799b (i believe it came from a hatch, but I'm not sure), changed it as I was doing manual to power window swap. Now my hatch does not open with a trunk handle, and pops open when i lock the car. I can only open it as I press lock button on my remote and open it at the same time. Tried some VDS-PRO bit changing, but without success, except windows by remote mod. Could those bytes for passat b5.5 wagon be the same as golf wagon?

EDIT: Today I've tried all these changes above for a Passat b5.5. Had zero success and the boot lid behaves the same, also my third button for the trunk on the fob does nothing still
 
Last edited:

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
Hi, having some problems with my golf variant 2000 after a CCM change to a 1co959799b (i believe it came from a hatch, but I'm not sure), changed it as I was doing manual to power window swap. Now my hatch does not open with a trunk handle, and pops open when i lock the car. I can only open it as I press lock button on my remote and open it at the same time. Tried some VDS-PRO bit changing, but without success, except windows by remote mod. Could those bytes for passat b5.5 wagon be the same as golf wagon?

EDIT: Today I've tried all these changes above for a Passat b5.5. Had zero success and the boot lid behaves the same, also my third button for the trunk on the fob does nothing still
Honestly, I don't know what bits your Golf wagon shares with a Passat wagon.
My best suggestion would be to reinstall the original CCM, and dump it with EasyCCM. Then reinstall the new CCM, and dump that one.
Start comparing the dumps - I'm thinking that my hatch work should at least tell you where to look for the differences between the two.
 

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
Honestly, I don't know what bits your Golf wagon shares with a Passat wagon.
My best suggestion would be to reinstall the original CCM, and dump it with EasyCCM. Then reinstall the new CCM, and dump that one.
Start comparing the dumps - I'm thinking that my hatch work should at least tell you where to look for the differences between the two.
Problem is, my previous CCM was without power windows, different plugs and wiring into CCM, so I can't connect it back and take the dump from the old one. I'm still trying to run EasyCCM, somehow it doesn't connect to my CCM. VDS-Pro runs fine :(
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
VDS-Pro can read data out in blocks of 10 - so, you could do it that way.
As for the old CCM: with that information... was it actually a CCM? Or, the more basic "power locks module"? I'm thinking it's the latter.... If it is, there isn't anything to read out of it, I think - just a fancy relay, really.
 

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
VDS-Pro can read data out in blocks of 10 - so, you could do it that way.
As for the old CCM: with that information... was it actually a CCM? Or, the more basic "power locks module"? I'm thinking it's the latter.... If it is, there isn't anything to read out of it, I think - just a fancy relay, really.
yes, sorry i named it wrong it was just a power lock module, part number 1C0 962 258N
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
I wish I knew exactly what you need to change here. But, not sure.

So that the forum-at-large can maybe give a little insight on this....
Could you post up the original values for:
04361-04363
04367-04369
04352-04354
04370-04372
As well as your new (modified) values?
 

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
I wish I knew exactly what you need to change here. But, not sure.

So that the forum-at-large can maybe give a little insight on this....
Could you post up the original values for:
04361-04363
04367-04369
04352-04354
04370-04372
As well as your new (modified) values?
04361-04363 was 10. Tried 2,3,67,10,0,74,66
04367-04369 was 255. Tried 191,253
04352-04354 was 8. Tried 9, 72
04370-04372 is a 4
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
Using my Passat notes....
Set:
04361-04363 to 0 (binary 0000000) (from 10 (bin. 00001010) (or 2 (for remote windows (bin. 00000010))
04367-04367 to 253 (binary 11111101) (from 255 (bin. 11111111))
04352-04354 to 72 (binary 01001000) (from 8 (bin. 00001000))
04372-04374 can stay at 4 (binary 00000100)

I can't guarantee that it'll work. But, I've changed your original values to reflect the modified bits that got me where I'm at on my B5.5 wagon (but keeping your remote windows mod.)

I know that you've already "tried" each of these values - but, some things are a 'only works if you do A + B.' So, if these values weren't all used in this particular combination, at the same time, please give it a whirl.
 
Last edited:

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
Using my Passat notes....
Set:
04361-07363 to 0 (binary 0000000) (from 10 (bin. 00001010) (or 2 (for remote windows (bin. 00000010))
04367-04367 to 253 (binary 11111101) (from 255 (bin. 11111111))
04352-04354 to 72 (binary 01001000) (from 8 (bin. 00001000))
04372-04374 can stay at 4 (binary 00000100)

I can't guarantee that it'll work. But, I've changed your original values to reflect the modified bits that got me where I'm at on my B5.5 wagon (but keeping your remote windows mod.)

I know that you've already "tried" each of these values - but, some things are a 'only works if you do A + B.' So, if these values weren't all used in this particular combination, at the same time, please give it a whirl.
ok, thanks for your help, will try that
 

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
Using my Passat notes....
Set:
04361-07363 to 0 (binary 0000000) (from 10 (bin. 00001010) (or 2 (for remote windows (bin. 00000010))
04367-04367 to 253 (binary 11111101) (from 255 (bin. 11111111))
04352-04354 to 72 (binary 01001000) (from 8 (bin. 00001000))
04372-04374 can stay at 4 (binary 00000100)

I can't guarantee that it'll work. But, I've changed your original values to reflect the modified bits that got me where I'm at on my B5.5 wagon (but keeping your remote windows mod.)

I know that you've already "tried" each of these values - but, some things are a 'only works if you do A + B.' So, if these values weren't all used in this particular combination, at the same time, please give it a whirl.
Unfortunately that didn't help. It still the same, except the alarm horn is now gone, only blinkers left. horn on the steering wheel works ok.
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
Alarm horn:
Changing the values in the 4360 block tends to set that to 'off'; I've had to re-enable that in VCDS after making changes there. That happened on my car when I did my first re-code (enabling remote windows.) Probably not a big deal.

If you want to give my modified values (for a U.S. market B5.5 wagon, for enabling 'remote tailgate and 'tailgate unlocked with rear doors) a try, here they are:

Tailgate unlocked w/ rear doors
04352-04354, set to 105 (binary 01 10 10 01)
and
04370-04372, set to 4 (binary 00 00 01 00)

tailgate operation via remote, and remote windows
04361-04363, set to 192 (binary 11 00 00 00)
and
04367-04369, set to 32 (binary 00 10 00 00)


Hope this helps.
 

Nerijus

Member
Joined
Jan 18, 2017
Location
Lithuania
TDI
mk4 vw Golf Variant
Alarm horn:
Changing the values in the 4360 block tends to set that to 'off'; I've had to re-enable that in VCDS after making changes there. That happened on my car when I did my first re-code (enabling remote windows.) Probably not a big deal.

If you want to give my modified values (for a U.S. market B5.5 wagon, for enabling 'remote tailgate and 'tailgate unlocked with rear doors) a try, here they are:

Tailgate unlocked w/ rear doors
04352-04354, set to 105 (binary 01 10 10 01)
and
04370-04372, set to 4 (binary 00 00 01 00)

tailgate operation via remote, and remote windows
04361-04363, set to 192 (binary 11 00 00 00)
and
04367-04369, set to 32 (binary 00 10 00 00)


Hope this helps.
Good news! Had a chance to read values from another golf wagons CCM with the same part number. Now the trunk works good, via remote also. Here are the values of the CCM if someone ever needs it. P.S. Thank you cuppie for your help :)
04349,50,51 - 161
04352,53,54 - 33
04355,56,57 - 255
04358,59,60 - 255
04361,62,63 - 73 (made it 65 for remote windows)
04364,65,66 - 60
04367,68,69 - 255
04370,71,72 - 6
04373,74,75 - 64
 

cuppie

Veteran Member
Joined
Aug 14, 2016
Location
Detroit, MI
TDI
02 B5.5 Passat 1.8t
Glad you got it sorted out. If my values didn't work (and, that was a 'maybe'), finding a like vehicle to dump its CCM was going to be my next suggestion.

Cheers!
 

DzieX

Member
Joined
Dec 18, 2012
Location
Poland
TDI
Not TDI :)
Hi,

Sorry for replying old topic, but I have curious case regarding that. I've ordered VFIZ (https://www.qmatis.com/en/devices/menu-vfiz/menu-vfiz-vw). I have immo3 cluster installed, but car is only immo2. Device mentioned above has build in CAN gateway to which I've connected CAN Convenience line from 1J0 CCM (it has CAN as well as 1C0 CCM, but not connected to cluster). All works excluding hood indicator. All door and trunk signals are sending by CAN line. Unfortunately we couldn't find hood sensor signal. It's for sure in car, because CCM measure blocks shows state.



Question to you:
- Is it possible to force IMMO3 cluster to read signal directly from input instead of CAN? I mean to change something in EEPROM dump and force it to work as in IMMO2 cluster.
- Do you know if 1C0 CCM sends hood signal by CAN? Do you know if 1J0 does it as well?
- Maybe you which frame should I look?

Thanks in advance.
 

SilverGhost

Veteran Member
Joined
Mar 25, 2005
Location
Back in So Flo - St Lucie
TDI
'05 Golf - totaled :(, wife's '13 Beetle - buy back, TDIless
Hmm, didn't I just see this?

I believe you have to add the wire from CCM to the cluster. No signal is sent over CAN for that function. Uh, green connector on cluster, T22 I think?

Jason
 
Top