Auto Window re-learn

After disconnecting my battery for replacing my DMF, all the one-touch windows work except the driver's "up" function. The window will roll up normally but no one-touch. I tried holding the switch up 3 seconds after it tops out but that didn't do it. I also tried cleaning the glass as some have suggested but that didn't help either. My VCDS shows a code for driver's door for not being calibrated. What gives? Any suggestions?

Can a Mod correct my subject line to say "Window" instead of quindow. I don't know what a quindow is. Lol

Try raising the window and holding the switch for 3 seconds, and then lowering the window and also holding the switch for 3 seconds.

Sometimes it takes a few tries in both directions.

Kolb said:

Can a Mod correct my subject line to say "Window" instead of quindow. I don't know what a quindow is. Lol

Click to expand...

Done!

Have Fun!

Don

P.S. tactdi's instructions should work. Just take your time and do one window at a time.

Tactdi - you were right. That worked when I started with the front passenger window first and worked my way around to the driver's side last. Thanks for the help!!