Millennium Falcon
Veteran Member
I am planning of putting a VW diesel in the jeep. Im in the early stages but I think it should be a good swap. I started working on the adapter plate. I have the template made, I just need to finish it and bolt it all together check the alignment before I start making chips.. It is physically the same size as the l-head. It has obvious performance gains. I think it will be a good fit. The plan is to make the back of the VW block/crank mimic the L-head. The adapter is pretty simple and once I get the flywheel depth figured out I will start making the crank adapter. If all goes as planned I wil use the stock willys bell,clutch,starter(gear reduction) and stock the t-90 trans.
Here is what its going in.....
(I cant get my IMGUR pictures to post in the correct size. They take up like 10 times the normal size)
Here is what its going in.....
(I cant get my IMGUR pictures to post in the correct size. They take up like 10 times the normal size)
Last edited: