mwhite1206
Active member
I was having issues with my '06 BRM going into limp mode and suspected the cause to be the EGR valve. I removed it and verified that it was not working properly and after some tinkering discovered that if I closed the valve and installed it but left it unplugged the car seemed to run fine. Assuming the EGR was the issue I ordered a new one and installed it tonight. Problem now is that it still runs fine with the EGR unplugged but continues to go into limp mode as soon as the EGR is plugged in. I'm now thoroughly confused. Anyone have any ideas on where to go from here?