classen
Veteran Member
Well I've had a pretty busy summer and I only got around to installing my MFD and TMC this past weekend. The install went pretty smoothly. I made a pig-tail harness very similar to the pencilneck one with the 4 pin quick disconnect so the pig tail adaptor can be easily removed.
I loaded in disc #1 and it updated the MFD firmware. I drove around for a few miles and it just worked. I was very pleased. I used some generic tap connectors from my local hardware store (the ones that are not recommended because they may result in no GALA signal). I didn't have the radioshack phone tap connectors on hand and I just wanted to get the job done. Anyways it appears the GALA signal is working just fine.
This is the MFD info:
NAV HW: 1002/36416
STAMP Mar 10 2003 / 12:10:57
my only problem right now is that despite having installed a TMC box, the volume and selection buttons on my steering wheel are not working. The cruise control works but no radio control. I will check all can-bus connections with my voltmeter this evening. If that fails I'll check the fuse in the TMC box, and if that fails I'll bring it up with the fellow that sold the TMC to me. The TMC box looks to be a 4BX 919 894A that has been flashed to 3B0 919 894A by Navi Service in Germany. The seller claimed it was working perfectly for him in his passat with MFD and FIS display.
Well I'll check it out this evening.
I haven't actually fitted the MFD into the DD slot yet, and it looks like it is going to be a real PITA. I will certainly use the string method to help pull the wires back at the same time I'm inserting the MFD.
wish me luck
I loaded in disc #1 and it updated the MFD firmware. I drove around for a few miles and it just worked. I was very pleased. I used some generic tap connectors from my local hardware store (the ones that are not recommended because they may result in no GALA signal). I didn't have the radioshack phone tap connectors on hand and I just wanted to get the job done. Anyways it appears the GALA signal is working just fine.
This is the MFD info:
NAV HW: 1002/36416
STAMP Mar 10 2003 / 12:10:57
my only problem right now is that despite having installed a TMC box, the volume and selection buttons on my steering wheel are not working. The cruise control works but no radio control. I will check all can-bus connections with my voltmeter this evening. If that fails I'll check the fuse in the TMC box, and if that fails I'll bring it up with the fellow that sold the TMC to me. The TMC box looks to be a 4BX 919 894A that has been flashed to 3B0 919 894A by Navi Service in Germany. The seller claimed it was working perfectly for him in his passat with MFD and FIS display.
Well I'll check it out this evening.
I haven't actually fitted the MFD into the DD slot yet, and it looks like it is going to be a real PITA. I will certainly use the string method to help pull the wires back at the same time I'm inserting the MFD.
wish me luck