sabrewolf
Veteran Member
:::BOTH SOLD:::
Hey all,
I know i havent been around lately...
But i wanted to give you guys/gals a first chance
at these 2 tools i have here, as i havent used them
in a couple of months...
PLASMA CUTTER SOLD!!! WOHOO!!
Tig Welder,
Miller Maxstar 150 STL
It is an Invertot-Based model with a 150amp
welding output running on a 110v/20a plug.
I have used it about 3 hours for various projects
on my car.. It comes with the Foot Pedal, and the
hand control that is nicely zip-tied to the gun
feeder hose. It comes with the stock cups and
tungsten rod sleeves. I have included extra
tungsten 1/16 electrodes too. Also comes with
Stainless consumable rods, and the stick-welding
claw too. Right now its setup for 110v/20 outlets,
but can easily be changed to a 220v outlet by just
cutting off the plug end and wiring a 220v single
phase plug to it. It has Auto-Voltage selection
for an easy upgrade to different plugs.
The gas regulator is included.. I can give you
a 1/4 full bottle of argon (80lb) for free if you
can meet me or come to the house to get it.
Ohh, it also comes in a nice rigid plastic
carry-case sorta like the plasma cutter
But i can't ship that anywhere...
Linky to the welder: http://www.millerwelds.com/products/...xstar_150_stl/
I am asking $1150.00
If you are interested, please email me:
robertkmagill at hotmail dot com
Both were purchased between July-August last year.
The original warranty should still be intact on both
of these units.
Hey all,
I know i havent been around lately...
But i wanted to give you guys/gals a first chance
at these 2 tools i have here, as i havent used them
in a couple of months...
PLASMA CUTTER SOLD!!! WOHOO!!
Tig Welder,
Miller Maxstar 150 STL
It is an Invertot-Based model with a 150amp
welding output running on a 110v/20a plug.
I have used it about 3 hours for various projects
on my car.. It comes with the Foot Pedal, and the
hand control that is nicely zip-tied to the gun
feeder hose. It comes with the stock cups and
tungsten rod sleeves. I have included extra
tungsten 1/16 electrodes too. Also comes with
Stainless consumable rods, and the stick-welding
claw too. Right now its setup for 110v/20 outlets,
but can easily be changed to a 220v outlet by just
cutting off the plug end and wiring a 220v single
phase plug to it. It has Auto-Voltage selection
for an easy upgrade to different plugs.
The gas regulator is included.. I can give you
a 1/4 full bottle of argon (80lb) for free if you
can meet me or come to the house to get it.
Ohh, it also comes in a nice rigid plastic
carry-case sorta like the plasma cutter
But i can't ship that anywhere...
Linky to the welder: http://www.millerwelds.com/products/...xstar_150_stl/
I am asking $1150.00
If you are interested, please email me:
robertkmagill at hotmail dot com
Both were purchased between July-August last year.
The original warranty should still be intact on both
of these units.
Last edited: