~~~ What's the SIZE of the 3 TORX SCREWS in the vnt-15 turbo? ~~~

I recently cleaned out my cruddy vnt-15 turbo but had to drill out the heads of the 3 Torx screws holding everything in the housing (rust). Does anybody know their SIZE (6mmx12, etc?) or where I can purchase them? Thanks.

hmmm... I can probably take one apart tomorrow and see what thread they are

ok... the thread is 4mmX0.7... They measure 22.6mm (.890") long.. You might be able to find allen headed screws at a hardware store, but make sure they are a high grade that won't melt inside the turbo...