Torque spec for seat belt bolts?

I removed my b and c pillar trim to drop my headliner last week. I had to remove the bolts from the seat belt shoulder harness to pull off the trim. Putting it back together now. Can anyone tell me what those bolts should be torqued to? I feel like they are sort of important and I can’t seem to find my Bentley at the moment.
Car is my 01 golf 2door.
Thanks!

some blue locktight and arm tight or lets say 25ftlbs.
body parts dont usually have a torque spec.
If you find any info, you might be the first person i know of to do so.
Just wrist tight that sucker in there.

Thanks mongler. I figured since they are part of a safety system, 8.8 bolts, etc. that they might have a listed spec. The bolt shoulders bottom out, and I didn’t want to risk over tightening and stripping out the insert.

Bently says those hex bolts at the shoulder mount (seatbelt height adjuster) under the concealment cap should be 40 Nm (29.5 ft lbs.)

STDOUBT said:

Bently says those hex bolts at the shoulder mount (seatbelt height adjuster) under the concealment cap should be 40 Nm (29.5 ft lbs.)

Click to expand...

That’s what I was looking for. Thank you