dwu.048
Well-known member
Hi all,
I recently bought the Chinese OEM auto-folding mirrors with 2 door modules (driver and passenger). I have a trendline TDI (lowest trim in Canada) and research says I need to update my door modules ending with 392(passenger)/393(driver) to 592/593 respectively. I literally copied the long coding from my previous '3' module to the '5' module. After copying over the long coding from the old module to the new one, I had to enable power folding mirrors on both. The auto-folding works (somewhat) so I know the mirrors are fine.
My problem now is that the modules cause the following:
I replug back the '3' modules and everything functions fine except the coding didn't work for the auto folding mirrors - obviously. The new switch works with the module '3' as well.
I am currently using OBDeleven. Did I need to copy over the adaptations too? Am I missing something?
I recently bought the Chinese OEM auto-folding mirrors with 2 door modules (driver and passenger). I have a trendline TDI (lowest trim in Canada) and research says I need to update my door modules ending with 392(passenger)/393(driver) to 592/593 respectively. I literally copied the long coding from my previous '3' module to the '5' module. After copying over the long coding from the old module to the new one, I had to enable power folding mirrors on both. The auto-folding works (somewhat) so I know the mirrors are fine.
My problem now is that the modules cause the following:
The passenger mirror folds as expected when the car is locked and unfolds when the ignition is switched on but the driver's mirror does the complete opposite. One is always folded while the other is always unfolded. I'll be driving with one mirror out and the other folded
- The front window controls in the driver and passenger doors are reversed. Up is down and down is up. The rear windows function as expected.
- The passenger mirror adjustment knob adjusts the mirror in the wrong direction - up isn't up, down isn't down, etc...
- Both driver and passenger door locks are the opposite. The lock unlocks and the unlock locks.
I replug back the '3' modules and everything functions fine except the coding didn't work for the auto folding mirrors - obviously. The new switch works with the module '3' as well.
I am currently using OBDeleven. Did I need to copy over the adaptations too? Am I missing something?