KLXD
Top Post Dawg
Seems to me the only flow path to the injectors is through the plunger and if it were broken it would block the flow to all of them.
The path is the chamber filling up, rotating to close the inlet port and compressing the charge to the injector. Maybe there's some overlap so the inlet and outlet ports are open at the same time but if so it would be for only one cylinder.
The path is the chamber filling up, rotating to close the inlet port and compressing the charge to the injector. Maybe there's some overlap so the inlet and outlet ports are open at the same time but if so it would be for only one cylinder.