All the controls on my pkg 2 driver seat do not work. Passenger seat controls work fine. Saw a thread from last year on same subject but it did not have any conclusions. Pretty sure I checked all fuses under hood and on driver side. Any ideas?
Yes, Passenger seat works fine. I pulled and checked every fuse under the hood and on the Driver side yesterday. All looked good. Is there another fuse panel not listed in the manual? I've tried resetting factory settings the "conv settings" on the computer menu. One of the recommendations from the thread I saw last year was to disconnect the battery to reset everything. I disconnected for about 10 sec and nothing changed. Would more time disconnected do anything more? Thanks for taking the time to help me out.
I unplugged the Battery for about 15 minutes with no help. The seat stopped working right after the dealership replaced the A/C compressor. Could there possible be something they did not reconnect in that area of the engine compartment and underneath? They had it up on the lift to do the job and a bunch of items came out to gain access to the compressor.
Hey bro, that was my thread from last year, turned out to be a simple fix. Inside the 8 way switch connector the pin (male) for the ground wire had lost contact with the contacts in the female connector. Try and slightly bend the pins so they make solid contact. I fixed my car in this manner after paying for several hours of diagnostics and a new 8 way switch.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.