ToddA1
Top Post Dawg
This was a trial. Spoke to people who used these and they said they worked better than the factory seat heaters. This was a test run, prior to installing them in my project car, if it ever gets finished.
2 seat kit. About $35 shipped from eBay.
This may be an OE footprint.
I read to add foil tape to reflect the heat and make the pads more efficient.
After I buttoned up the bottom, I figured I’d better test the kit... worked fine.
Did the same to the seat back.
Reassembled. Pad wire routing, is somewhat factory.
As I’m posting this, I’m sitting in the seat with the heat maxed... pretty toasty. The switch is huge....
I’ll test run this in the Rotbox over the winter and see how they hold up. Need to get the driver seat done and the harnes installed.
-Todd
2 seat kit. About $35 shipped from eBay.
This may be an OE footprint.
I read to add foil tape to reflect the heat and make the pads more efficient.
After I buttoned up the bottom, I figured I’d better test the kit... worked fine.
Did the same to the seat back.
Reassembled. Pad wire routing, is somewhat factory.
As I’m posting this, I’m sitting in the seat with the heat maxed... pretty toasty. The switch is huge....
I’ll test run this in the Rotbox over the winter and see how they hold up. Need to get the driver seat done and the harnes installed.
-Todd