darrelld
Veteran Member
2nd Generation 3.0 TDI training manual. The manual mentions 2 CP4.2 high pressure fuel pumps, misprint?
http://admin.audionlinetraining.com/Upload/SSP/503_SSP479_WG_EN.pdf
An SAE paper on this substrate and test results are located here;
http://www.corning.com/WorkArea/showcontent.aspx?id=7335
http://admin.audionlinetraining.com/Upload/SSP/503_SSP479_WG_EN.pdf
The manual also mentions a new type of DPF substrate promoting longer intervals between regens.Page 23
The piezo injectors are connected to the extremely short, forged
rails by stainless steel lines designed to withstand injection pres-
sures of up to 2000 bar. Rail pressure is produced by two CP4.2
dual-plunger high pressure pumps with an aluminium casing.
An SAE paper on this substrate and test results are located here;
http://www.corning.com/WorkArea/showcontent.aspx?id=7335
Last edited: