Headlight fogs + bumper fogs???

Well... long story short I had some crazy lady back into me a few months back, but never realized until now that driver side headlight is cracked on the support. So the whole thing vibrates with the car. Eventually I will need to get new headlights and I am actually looking at going with some nice projection headlights from midwest light or VXT tuning. My question is... since I am going with new lights I'd like to wire in the headlight fog and possibly some bumper fog lights as well. Is this possible to do both? also, what all would I need to accomplish this?

Since you will most likely be running the fogs through a relay, you would just put the external fog lights in || with the ones in the headlight buckets. The bigger the wire you use the lower the voltage drop across it and the brighter the lights will be.
cheers,
Douglas

I know ECS has a kit for both. would I be good with just buying both kits?

ECS Tuning has a set of instructions you can look at. It covers the switch and hook up to the light bucket fogs. It uses a relay, and the second set of fogs would just ride the same circuit on that relay.
cheers,
Douglas
http://bd8ba3c866c8cbc330ab-7b26c6f..._Fog_Light_Wiring_Harness_Installation_R2.pdf