Egr delete

Hey guys,

So to follow up with my previous post, my car is still pissing coolant. I'm 99% sure its probably the egr cooler so I've decided I'm going to do an egr delete and hope the problem goes away. My question is what exactly do I need for an egr delete on a bew motor? Is it just the block off plates? http://www.fixmyvw.com/bew-bhw-egr-cooler-bypass-delete-kit-by-buzzken-bew-bypass/

Also is the car going to run fine without a tune? I understand I'll probably get a check engine light but is that all?

Any other Info on what I will need is greatly appreciated!

Bump. Same question on my 2005 Beetle.

That set us everything you need except for the block of plate fit the valve itself. You just leave the valve in place. Some sets have another large plate that covers where the valve goes. It also comes with the barbs to bypass the cooler hoses.
It will run fine but you will have a permanent CEL.

Sent from my XT1575 using Tapatalk

So does that kit remove the ASV? I currently have an auto and would like to keep it so if the turbo goes and runs away I can turn it off.

Not on a PD. it's a separate valve.

Sent from my XT1575 using Tapatalk