Scorp67
Member
Finished a rebuild on my motor today and im not having much luck with starting it
Does anyone have some advice on the procedure to follow
I turned the engine over by hand with 2l of oil to prime the oil pump
Cranked it with the starter to pump some oil to the bearings
Topped up the oil
Blead the fuel system and cranked, fuel at each injector
Slightly concerned about pumping lots of fuel into the cylinders with repeated cranking
I dont have access to VAGCOM to check for faults, its possible the injector timing is too advanced or retarded but i followed proper procedure with the timing belt
Looking for advice on where to start looking for troubleshooting
Does anyone have some advice on the procedure to follow
I turned the engine over by hand with 2l of oil to prime the oil pump
Cranked it with the starter to pump some oil to the bearings
Topped up the oil
Blead the fuel system and cranked, fuel at each injector
Slightly concerned about pumping lots of fuel into the cylinders with repeated cranking
I dont have access to VAGCOM to check for faults, its possible the injector timing is too advanced or retarded but i followed proper procedure with the timing belt
Looking for advice on where to start looking for troubleshooting