Grigg3
Veteran Member
I haven't had time to update mine and try again, but will post when I do.
DPF st. shows "0000" Not sure what this isThese might be right, but I'm still confused, example values while parked/idling:Soot m gr. -1.2
!Soot m gr. 10.0
"!" means its a calculated value, but what's the calculation in this case?
Upgraded with the final v021 with more improvements. ... final version (not beta).
The problem with the old visualization method is that was possible align very good 1st and 2nd line, but 3rd and 4th was a nightmare so we moved to this one that align all centered.
PF04/PF05 Firmware Update v0.2.1
Added support for TORQUE and POWER CV in ECU EV_ECM18TFS0218V0906264x
Added support for new ECU EV_ECM16TDI02103L906023TF 003004
Added support for new ECU EV_ECM20TFS0208V0906259J 001003
Fixed issue that make that Virtual Cockpit screens get freezed sometimes
Fixed issue with menu access in some PF05 devices
Improved alignment of parameters in normal clusters and Virtual Cockpit clusters
New USB method for upgrade all PolarFIS devices (in beta mode, for testing)
New UpdaterTool released supporting new flashing method (v1.7.0)
Fixed issue with mirrors not working properly in some vehicles reported by users
Some other general improvements
New Virtual Cockpit firmwares added in support area (for UpdaterTool)
From now, there will be 2 differenced firmwares for the PolarFIS MQB devices.
Firmwares MQB FIS
This firmware version is for MQB vehicles equipped with WHITE and COLOR clusters (display)
It will make visible 4 lines of parameters
Firmware MQB VC
This firmware version is for MQB vehicles equipped with VIRTUAL COCKPIT display
It will make visible 3 lines of parameters
New USB connection method
We improved the connection via USB method, for upgrade the units, so now is not needed any confirmation in the UPDATE menu of PolarFIS. This will make that update process will be more easy, and user will be asked in the screen of the UpdaterTool for change from NORMAL MODE to FLASHING MODE.
This only will work with this new firmware and future firmwares, and with the last version of UpdaterTool, so we recomend all to download our last version v1.7.0 (already available in our website). Upgrade your PolarFIS device is very fast and easy. Just download the Updater Online software, CONNECT your unit and press UPDATE. You will be able to select your firmware desired and make click on it. Flashing procedure will take only few seconds.
Updater Online (v1.7.0): https://www.autopolar.net/downloads/Updater_Online.zip
I'm guessing (hoping) they will. I don't doubt it will eventually get there.Hopefully the vendor you bought from can stand behind the product they are selling.
Right now everything is updated to latest (when it was removed from the car). Right now with everything plugged into the car AND the USB cable just plugged into the PolarFIS, no laptop connected, I get "audio not avail" on MFA.I thought Polar stated you needed to pull a fuse/disconnect the battery in order to connect to a laptop (IE the canbus is still live while your trying to talk to it and gets all confused). Or are you saying that even with the USB cable just plugged in (not connected to anything) the "audio not available" still displays?
d with the new updating tool.
740GLE,
Do you have the MQB Polar FIS?
Yeah, I'm still looking into what could have caused the dead battery, it's been perfect ever since. Really odd situation it was.I'd be more curious if the FIS+ caused the battery to go flat.