Good morning all?
Can someone help with a 2010 2.0 tdi Tiguan. The MIL came on and went in to limp mode gave codes of P2015 manifold flap signal implausible & P0209 boost pressure control range not reached so fitted a bracket off ebay no difference. Purchased a new plastic Manifold adapted with vcds then had codes P2015 & P2004 manifold control runner stuck open its running with no power and a howling noise when revved. So fitted a used aluminium Manifold (tested) and now still got P2015 and the same loss of power and howling noise. Any Ideas please? Thanks.
Can someone help with a 2010 2.0 tdi Tiguan. The MIL came on and went in to limp mode gave codes of P2015 manifold flap signal implausible & P0209 boost pressure control range not reached so fitted a bracket off ebay no difference. Purchased a new plastic Manifold adapted with vcds then had codes P2015 & P2004 manifold control runner stuck open its running with no power and a howling noise when revved. So fitted a used aluminium Manifold (tested) and now still got P2015 and the same loss of power and howling noise. Any Ideas please? Thanks.