3L3M3NT
Veteran Member
** CANCELLED **
See post #40
Official Date for Platteville Dyno Day is April 21st, 2012.
Info
Where: The dyno is located in the new Engineering building. It's #25 on the map http://www.uwplatt.edu/contact/images/Campus_Map.jpg
When: April 21st, 2012 Starting at 10am-9pm
Cost: $30 for 3 runs
Make sure your car is in good working order, since any catastrophic failure will ruin your day and probably make a mess on the dyno. Not say things can't happen, but lets try and prevent any issues.
For those interested to come and check it out for the day you are more than welcome to come and meet some of the other members, chat it up, check out the cars, etc.
Well sincence we never seem to have an issue with to many cars for the time frame, I've decided a sign up sheet isn't really necessary.Also if you have any friends that have something other a TDI, tell them to feel free to bring it to the dyno day.
The dyno that is being used. http://www.mustangdyne.com/mustangdyne/products/chassis-dynamometers/2wd/?prod=MD-250+Series
If you have any questions feel free to contact me.
See post #40
Official Date for Platteville Dyno Day is April 21st, 2012.
Info
Where: The dyno is located in the new Engineering building. It's #25 on the map http://www.uwplatt.edu/contact/images/Campus_Map.jpg
When: April 21st, 2012 Starting at 10am-9pm
Cost: $30 for 3 runs
Make sure your car is in good working order, since any catastrophic failure will ruin your day and probably make a mess on the dyno. Not say things can't happen, but lets try and prevent any issues.
For those interested to come and check it out for the day you are more than welcome to come and meet some of the other members, chat it up, check out the cars, etc.
Well sincence we never seem to have an issue with to many cars for the time frame, I've decided a sign up sheet isn't really necessary.Also if you have any friends that have something other a TDI, tell them to feel free to bring it to the dyno day.
The dyno that is being used. http://www.mustangdyne.com/mustangdyne/products/chassis-dynamometers/2wd/?prod=MD-250+Series
If you have any questions feel free to contact me.
Last edited: