1.6tdi
New member
Hey guys i am new to this forum and i am really in need of advice.
I have a 2011 polo and i recently took my car in to a local mechanic which is also my friend, to replace one of the seals around the injector. He then had problems taking out injector nr 3 and 4 as it was stuck and one of the copper washers was ceased to the engine. He used a special tool that u screw on the injectors to loosen them. After replacing all seals and washers the car doesnt want to start and wen it does it has a very rough idle and a ping like noise like its over fueling. The vcds scanner doesnt pick up any problems or errors and we even recoded the injectors. The car was running 100% prior to this and i am really frustrated that this is happening. Is there anyone that could please advise me what this could be
I have a 2011 polo and i recently took my car in to a local mechanic which is also my friend, to replace one of the seals around the injector. He then had problems taking out injector nr 3 and 4 as it was stuck and one of the copper washers was ceased to the engine. He used a special tool that u screw on the injectors to loosen them. After replacing all seals and washers the car doesnt want to start and wen it does it has a very rough idle and a ping like noise like its over fueling. The vcds scanner doesnt pick up any problems or errors and we even recoded the injectors. The car was running 100% prior to this and i am really frustrated that this is happening. Is there anyone that could please advise me what this could be
Last edited: