PWM
Veteran Member
- Joined
- May 10, 2000
- Location
- Western Siberia (Finland)
Hi !!
I was wondering about a CAN-bus adapter to PC ..
Now I have figured out the schematics and parts to rs-232 interface.
But what's the pin-out of different connectors used ?!
(There's at least OBD-II , 2x2 and 16pin Audi types !!)
So if you have the info about the pin-out of any
of these - please tell me !!
(I need pins for CAN-ground , CANH and CANL signals ..)
And do these have similar pins in every connector
type used ?! - Perhaps I could just do one
cable with manually pluggable pins in other
end to be able to adapt all connectors ..
If I get the thing to work I'll post the
DIY-instructions here ...
I was wondering about a CAN-bus adapter to PC ..
Now I have figured out the schematics and parts to rs-232 interface.
But what's the pin-out of different connectors used ?!
(There's at least OBD-II , 2x2 and 16pin Audi types !!)
So if you have the info about the pin-out of any
of these - please tell me !!
(I need pins for CAN-ground , CANH and CANL signals ..)
And do these have similar pins in every connector
type used ?! - Perhaps I could just do one
cable with manually pluggable pins in other
end to be able to adapt all connectors ..
If I get the thing to work I'll post the
DIY-instructions here ...