Can’t seem to find a oil pressure gauge that uses the metric thread and non pipe thread style fittings like the factory pressure sensor does. Trying to add a mechanical gauge to the car to keep an eye on things...
Oil pressure gauge fittings
- Thread starter BlackBHW
- Start date
Vince Waldon
Top Post Dawg
The factory port is M10x1, but 1/8 27NPT will work, with a little teflon tape.
The teflon tape is no problem if the gauge is mechanical, but if using an electrical sensor you may need to ground the sensor separately.
The teflon tape is no problem if the gauge is mechanical, but if using an electrical sensor you may need to ground the sensor separately.
DeliveryValve
Veteran Member
DeliveryValve
Veteran Member
Thanks