janssen_nicholas
Well-known member
Looking to sell my 2010 TDI Cup Edition Jetta. The car doesn't have the thunder bunny bumpers. It has 130k miles and several upgrades including:
CP3 High Pressure Fuel Pump w/ 1 micron filter
Complete turbo back Buzzken 3" Exhaust
Custom intake with Pro Dry S AFE Filter
CR 170 turbo installed last week
Malone stage 3 tune with full EGR / DPF delete w/ dynamic idle
Malone DSG tune
Blacked out Depo projector headlights with 55w HIDs
Blacked out LED tail lights
Koni coilovers
Aluminum ECS tuning control arms with poly bushings
Poly dogbone mount insert
New ball joints
Fluidampr harmonic balancer
Full LED interior, trunk, and license plate lights
Projector fog lights with Euro switch
Navigation
New valve cover
Mann Provent crankcase vent filter
New timing belt with pulleys and water pump at 116k miles
New dual mass flywheel
New thermostat
EBC slotted rotors and Redstuff ceramic pads at 116k miles
Stainless steel ECS tuning brake lines
Huper Optik ceramic tint
Integrated Engineering forged rods
Ceramic coated pistons
New head gasket and rod bearings as of 9/2018. (water ingestion)
I'm asking $15k with all the upgrades and since it's a cup edition car. Let me know if you have any questions.
CP3 High Pressure Fuel Pump w/ 1 micron filter
Complete turbo back Buzzken 3" Exhaust
Custom intake with Pro Dry S AFE Filter
CR 170 turbo installed last week
Malone stage 3 tune with full EGR / DPF delete w/ dynamic idle
Malone DSG tune
Blacked out Depo projector headlights with 55w HIDs
Blacked out LED tail lights
Koni coilovers
Aluminum ECS tuning control arms with poly bushings
Poly dogbone mount insert
New ball joints
Fluidampr harmonic balancer
Full LED interior, trunk, and license plate lights
Projector fog lights with Euro switch
Navigation
New valve cover
Mann Provent crankcase vent filter
New timing belt with pulleys and water pump at 116k miles
New dual mass flywheel
New thermostat
EBC slotted rotors and Redstuff ceramic pads at 116k miles
Stainless steel ECS tuning brake lines
Huper Optik ceramic tint
Integrated Engineering forged rods
Ceramic coated pistons
New head gasket and rod bearings as of 9/2018. (water ingestion)
I'm asking $15k with all the upgrades and since it's a cup edition car. Let me know if you have any questions.
Last edited: