andy2
Veteran Member
- Joined
- Sep 24, 2004
- Location
- Bowmanville,Ontario,Canada
- TDI
- 13 Jetta,94 Golf drag car 585bhp,Samurai buggy BHW 300bhp,97 Ram cummins
defintiely looks like a good/proven idea.Let's see some common rail compound/staged power ?
If you still havnt bought one I recommend this place: http://www.dli-teknik.se/index.php?section=products&subsection=7&cat=30&s1cat=114&lang=ensure I have turbos, engine, everything, just no time and clutch
Kit arrived, flywheel is reallz have and looks to be made will, lot of attention to details. I have the SRE pressure plate and sprung sinter disc.If you still havnt bought one I recommend this place: http://www.dli-teknik.se/index.php?section=products&subsection=7&cat=30&s1cat=114&lang=en
I have bought a 600Nm combo for coming project realy nice made flywheel and not to expensive I think. He have stronger ones to if needed.
Edit, for 01E he surely have some special options.
Theo
I kindv'e see why you might want a catch can after my anti shudder valve died from being filled with oil...... You can still vent back into the engine with a catch can...no oil catch can, i see no need and always vent back into the engine where i can.
We have an oil cooler but oil rarely gets to 100 degrees even on the hottest day on the airfield for the top speed run!
My one still had all it's teeth, just failed electrically.... Electrical failure being caused by being full of blow by oil....these valves on the 16v fail all the time.. the plastic gear loses its teeth, I don think it has anything to do with oil inside it