Ross Tech HEX NET update/code reading issue

Im having a little trouble updating a NEX NET, every time I go to update it says its done but when i check the update it says I still need that same update. my fault codes listed below all show "ROD - unknown fault code"


here is how my logs/codes are shown

------------ Address 01: Engine (CRUA J623) Labels: 04-01.lbl Part No SW: 04L 906 021 D HW: 04L 907 309 Component: R4 2,0L EDC H23 8413 Revision: 85H23--- Coding: 011D0012032410081000 Shop #: WSC 59915 001 1048576 ASAM Dataset: EV_ECM20TDI01104L906021D 001014 ROD: N/A VCID: 260F659BC206854A477FA4DB28-8073 No ASAM data for: "EV_ECM20TDI01104L906021D" 1 Fault Found: 004714 - ROD - Unknown faultcode ----------------------------------------------------------------- Address 02: Auto Trans (J743) Labels: 0D-02.lbl Part No SW: 0D9 300 041 N HW: 02E 927 770 AQ Component: DQ250-6F MQB H52 4506 Revision: 05852204 Coding: 0014 Shop #: WSC 00066 790 00201 ASAM Dataset: EV_TCMDQ250021 001001 ROD: N/A VCID: 23097C8FB1347062206185B713-8076 No ASAM data for: "EV_TCMDQ250021" 1 Fault Found: 021222 - ROD - Unknown faultcode ----------------------------------------------------------------- Address 03: ABS Brakes (J104) Labels: 5Q0-907-379.clb Part No SW: 5Q0 907 379 K HW: 5Q0 907 379 F Component: ESC H31 0371 Revision: 00000000 Coding: 01FA6AA124220975007B020381C72580562490004081A4B200630050C002 Shop #: WSC 01383 790 50316 ASAM Dataset: EV_Brake1UDSContiMK100ESP 033001 ROD: EV_Brake1UDSContiMK100ESP_VW37.rod VCID: 44CBDF13547A575A79ABEE23AE-8011 No fault codes found.

Ross-Tech has their own forum and they're keeping all HEX-NET support there while it is still in beta testing. I would suggest posting your information and error messages in that forum. Look here: http://forums.ross-tech.com/forumdisplay.php?8-HEX-NET-Beta-Support

You will probably get answers quicker at their own site.

Have Fun!

Don

P.S. Have you tried both the VCDS-Mobile update function and the JAVA update app from Ross-Tech? It might be worth a try.

The current version of the HEX-NET can be found here:

http://forums.ross-tech.com/showthread.php?115-Current-Versions

At this time 2nd of May, 2015, at 5:15 Eastern time (21:15 GMT) is as follows:

CodeBlock: V0.4313
FW: 0.238
CFB: 0.10
BL: 0.27
Dataset: 10000042

Click to expand...

Do make sure that information matches up. If not, then this thread may be helpful:

http://forums.ross-tech.com/showthread.php?3757-How-to-update-HEX-NET-for-use-with-15-7

If you need further assistance, all of our register customers can get help on our forum.

Regards.