procupine14
Veteran Member
So, I've been browsing around awhile now searching for something to replace the halogen bulbs on my Beetle. They seem to burn out very frequently and I'm growing tired of replacing them. Not sure if anyone else has this problem or not but hey. Essentially, I take all the precautions with not touching the bulb and carefully putting the bulb in place and I've already had two burn out on me in 6,000 miles or so of eachother. Really starting to get annoyed as I always replace the pair every time to eliminate differences in the bulb. This time I might just replace the one.
Any way, on to the question at hand. I wonder if something like this would work inplace of my low beams.
They are basically an H1 LED replacement bulb. Technically, they are meant for use as fog lights but I can't help but wonder what their output would look like in the projector housing. If they proved successful this might be the answer to my problem.
As another note, I have also thought about a Euro switch/ disable the DRLs to save the bulbs but I just don't know which direction to go.
Any way, on to the question at hand. I wonder if something like this would work inplace of my low beams.
They are basically an H1 LED replacement bulb. Technically, they are meant for use as fog lights but I can't help but wonder what their output would look like in the projector housing. If they proved successful this might be the answer to my problem.
As another note, I have also thought about a Euro switch/ disable the DRLs to save the bulbs but I just don't know which direction to go.