www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You

Order your TDIClub merchandise and help support TDIClub


Go Back   TDIClub Forums > TDI Model Specific Discussions Areas > Audi SUVs (Q7 & Q5) and other V6 TDIs

Audi SUVs (Q7 & Q5) and other V6 TDIs Discussions area for Audi Q7 and Q5 TDI (2009+ in Canada & the US) as well as others with the V6 TDI such as the A6, A7 and A8 sedans.

Reply
 
Thread Tools
Old December 1st, 2019, 09:51   #1
A1sailor
Newbie
 
Join Date: Apr 2018
Location: Ontario, Canada
Default Belt tensioner, idler pulley and belt replacement ?

For prevent maintenance what mileage should these parts be replaced?
I'm at 108,000 km (67,000 miles), no sign of any noise so far, I will remove belt to check sound of bearings in pulleys, however, it is very tight spacing between the radiator and belt to work.
A1sailor is offline   Reply With Quote
Old February 13th, 2020, 22:00   #2
JoeQ7
Newbie
 
Join Date: Feb 2020
Location: Okanagan, BC, Canada
Default

I can't tell you when you should swap your idlers out for new ones, but, here's a cautionary tale from last weekend:


I bought a Q7 with 220,000 km's on it a month ago. Last weekend we went for a road trip from BC to Idaho to have a little play in the casino. I won US$2,300 from a $100 stake, and was real happy during the drive home.


That's when one of my idler pullies decided to 'disappear'. Like, vanish!



Late at night and right in the middle of nowhere, as well as -10deg C. Got a taxi back to town ($250 and 3 hours ordeal), hired a rental car at the airport to run around in ($50), hotel for what's left of the night ($100), tools to replace the idler, plus contingency items ($100), and a new idler ($15) and belt ($36).


So, so far I'm out $540 and counting for a $15 part. My wife lost a day's wages, and I had the cost of gasoline for the rental car to factor in.

In reality, let's call it $900 for the sake of a $15 part.


It took me about an hour to fit the new idler and serpentine belt. The old belt was fine, but I replaced it anyway. I nearly got frostbite on my fingers, but the job itself was easy peasey lemon squeezy. BTW, there's plenty of room between the radiator and the idlers. I had no issues, and I have large hands.



The only difficult part was a undoing a 6" metal bracket that runs from the bottom of the engine block, around the belt, then back to the block. It has a wiring harness atached to it, which had to be disconnected all the way to, and including, the 2 sensor plugs. The plugs were a bit of a ***** to get off, I must admit.

What a pain in the arse!! This would have been a simple task if I had access from underneath. I was only able to reach the top fastening of the bracket and unscrew the torx screw. After that I just bent the bracket out of the way and fed the new belt on.


Yesterday, I renewed the 3 remaining idlers!
JoeQ7 is offline   Reply With Quote
Old February 19th, 2020, 21:13   #3
A1sailor
Newbie
 
Join Date: Apr 2018
Location: Ontario, Canada
Default

Joe, sorry to hear of the part failure and the pain and cost it set you back. Do you recall if you heard any unusual noise from the idler pully?

I think you were lucky that the failed idler did not do any other damage. However, it sounds like Lady Luck was on your side on that trip to some degree.

Sounds like a lot more room to work on the Q7 vs the Q5 as I think I need to remove the front bumper fascia in order to move the rad carrier forward to gain access to these parts and I'm not quite 100% sure how to do this yet but researching the method on the web.
A1sailor is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to Replace ALH Serpentine Belt Tensioner and Idler Pulley (with photos) alkmisc VW MKIV-A4 TDIs (VE and PD) 50 September 3rd, 2019 15:09
LF: Accessory Belt (Tensioner) Idler Pulley/Roller velvetassassin96 Ontario 9 August 15th, 2011 15:23
Replace alternator pulley when replacing idler pulley?/Examining Belt Tensioner meccaA4 TDI 101 3 August 16th, 2010 12:53
Timing Belt Replacement- Belt Pulley and Tensioner replacement not a Must? investmart VW MKIV-A4 TDIs (VE and PD) 17 March 24th, 2008 09:09
T-Belt Tensioner and Idler replacement question silverfishk8 VW MKIV-A4 TDIs (VE and PD) 7 February 28th, 2008 20:01


All times are GMT -7. The time now is 08:53.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2017, All Rights Reserved
Page generated in 0.12515 seconds with 12 queries
[Output: 58.93 Kb. compressed to 53.82 Kb. by saving 5.11 Kb. (8.67%)]