Yeah, I had all the screws out. Turns out in the MkVii, there is a clip below the trim piece along the tunnel next to the driver's leg. It is briefly mentioned in another diagram. I pulled hard on it and it came loose. The plug for the connector is just above the steering column, not above the accelerator pedal as described for another model. It's tight, but I was able to get it to connect. However, only error codes. I drove it for a few miles, about 10 minutes. None of them disappeared and the screen is not working as I had hoped. I'm busy with work tomorrow, but hope to call Kerma when they're open. I know it's updated to the most recent software. Flashing glow plug light, airbag warning, lighting warning, interior lights didn't work correctly . . . I hope it's an easy and quick fix. i really want this to work.