2TDIguy
Veteran Member
- Joined
- Nov 23, 1999
- Location
- Lincoln, NE, USA
I spent 30 mins googling. found the process tons of times but nothing specific to the tool needed to remove the injector hold down bolt. Just need that info please.
can someone tell me the BHW injector tool/ size needed to pull injectors?
- Thread starter 2TDIguy
- Start date
MOGolf
Top Post Dawg
- Joined
- Jun 27, 2001
- Location
- underneath something
- TDI
- 2001 Golf GLS TDI Reflex silver, rough road suspension and steel skid plate, 2004 Passat Variant, Candy White, rough road suspension and geared balanced shaft module, and much, much more. 2016 LR RR HSE TD6, 2019 Jaguar I-PACE
http://www.metalnerd.com/cat10.htm or VW tool T10055 at tools.vw.com and other fine places for pulling out the injector.
The bolt itself is requires T10054 or an adequately long XZN6 bit or bit with extension such as found the kit at http://www.metalnerd.com/cat05.htm.
The bolt itself is requires T10054 or an adequately long XZN6 bit or bit with extension such as found the kit at http://www.metalnerd.com/cat05.htm.