Steering high pressure line

I have a leek at the fitting between the flex hose and the metal line. Way to remove line from the hose and replace just the high pressure hose and not the whole line.

You'll probably need to have the hose replaced at a hydraulic shop that can crimp on the replacement hose, but it shouldn't be an issue, other than the aggravation (err, fun?) of removing the hose/pipe assembly in the first place.

The shop can likely match the hose and do the whole thing fairly cheaply, as well. I know I've used one here in my area for MB parts a few times over the years, and have even seen them doing brake lines for motorcycles occasionally.