2000 beetle. While doing brake pads and rotors, I noticed the front lca rearmost bushings were destroyed. Pulled them out, and one of the front bushings was in really bad shape. Replaced both control arms with new bushings. The sway bar bushings were bad as well.
Now the car pulls slightly to the right accelerating, and slightly to the left on decel. I am guessing that the rear axle beam bushings are bad as well. Could that be what is causing the pull? The rest of the suspension/steering is all new (10-12k miles) with the exception of the inner tie rods.
Now the car pulls slightly to the right accelerating, and slightly to the left on decel. I am guessing that the rear axle beam bushings are bad as well. Could that be what is causing the pull? The rest of the suspension/steering is all new (10-12k miles) with the exception of the inner tie rods.