Happy pp357 owner :-)

I just put a set of PP357 nozzles on my manual ALH euro engine.
That mod is on top of mild OBD chip tuning made by TCM Germany (without PP nozzles, power was 125HP ).
The power is way up and I have smoke only on shifting at WOT.
How much estimate power gain do I have with that chip and the new 357 nozzles?
One more think, the original nozzles was DSLA 150P706, Made in France.
Do you recommend me to modify the chip?

I just buttdynoed my car and hire is the results:
103KW (139Hp) and 316Nm (233lbs/ft)
The clutch isn't happy with new added power and I wonder if G60/VR6 combo will be good for this setup
My car is smokeless after I modified IQ at idle from 1.8 to 3.4
80-120Km/h sprint time went at 6.9s, from vagcom logs on group 6

Those are impressive numbers. I bet the clutch isn't happy. G60 would work wonders--it's rated to 300 lb/ft but many have been able to run more.