thechoochlyman
Vendor , w/Business number
For a couple of months my fuel gauge wouldn't register under 10 gallons in the tank. Today I finally pulled it out. I wiped everything off nicely with a paper towel and actuated the sender outside the tank. I got full range of motion on the gauge, so I stuck it back in. Turns out, at the angle the sending unit was oriented in the tank, it wouldn't read below 10 gallons. If I rotated it 20 degrees or so in either direction it would drop down to my actual reading (about 6 gallons). I had just enough room to get the fuel lines back on by rotating it a bit counterclockwise, so that's where I left it.
There didn't seem to be any obstructions in the tank. Any idea what the heck is going on?
There didn't seem to be any obstructions in the tank. Any idea what the heck is going on?