dweisel
Top Post Dawg
Have something I've never run into. 04 Beetle had two keys. Only one had a rfid chip. I've removed chips from keys before and used silicon to hold them near the ignition switch where they would work giving me a couple working keys. This time I did exactly that. The immo light goes out when the chip is in the sweet spot, but I'm getting a flashing glow plug light and the engine only runs for a couple of seconds and shuts off. Also have a VCDS code for the immo being activated preventing it from running.
I've never had the flashing glow plug light before as a sign that the immo was active.
Any insight would be appreciated.
dweisel
I've never had the flashing glow plug light before as a sign that the immo was active.
Any insight would be appreciated.
dweisel