www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You

Order your TDIClub merchandise and help support TDIClub


Go Back   TDIClub Forums > Picture Gallery/Specs of Members' TDIs > Passat TDI Picture Gallery

Passat TDI Picture Gallery Do you have a Passat TDI? If so write a message here describing it and insert a picture if you have one. If you don't have one on the computer, email me and I'll give you my address and I'll scan it for you. If you need web space for it, email me as well. Please make a short yet descriptive title for your vehicle.

Reply
 
Thread Tools
Old April 7th, 2015, 09:38   #1
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default B5.5 Wagons

Been off the forum for a while as I'd sold my 2004 black passat high line anyway the sale didn't happen so the car was dispatched to the body shop for 2 new front wings. Also in the mean time I've also bought a 2005 silver passat trend line which is one owner from new with a full service history. So far for it I've bought coil overs, a stubby ariel and a nice set of 18" BBS alloys........pictures to follow.
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788

Last edited by leon10tagg; August 27th, 2015 at 14:45.
leon10tagg is offline   Reply With Quote
Old August 27th, 2015, 14:48   #2
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Recent picture of my silver wagon with BBS and rear coil overs fitted.

__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Old August 30th, 2015, 10:03   #3
1854sailor
Resident Curmudgeon
 
1854sailor's Avatar
 
Join Date: Aug 2004
Location: Baltimore, MD
Default

Nice!
__________________
Never wrestle with pigs. You both get dirty and the pig likes it.
-George Bernard Shaw
1854sailor is offline   Reply With Quote
Old August 31st, 2015, 14:06   #4
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

This mornings work....setting the FK coilovers to the final height....


Removal of the top arm pinch bolts took a while as the bolts had never been out before in 126K miles.....so the only solution was a bit of heat and a new set of top arms on both sides....


And as I had no new pinch bolts available I ended up doing this as a temporary measure.....


The next job is to get my black highline Passat back into my garage to finish the engine, sort out the brakes and get it back on the road hopefully with around 230whp....
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788

Last edited by leon10tagg; August 31st, 2015 at 14:13.
leon10tagg is offline   Reply With Quote
Old September 1st, 2015, 10:45   #5
Nash_TDI
Veteran Member -TDIClub Enthusiast
 
Nash_TDI's Avatar
 
Join Date: Sep 2002
Location: Louisville, ky
Fuel Economy: 63.25mpg max
Default

Nice looking wheels. Are they RXs? Just picked up some RGRs for my passat.
__________________
2.0 ALH, GTB2260, 12mm, etc, etc.....
www.nashimporters.com http://louisvillevw.org/
TDI Repair Available, TBs, Clutches, Manual Swaps, BSM, etc..
PD Cam tools, BSM tool, VE & PD TB tool rental available.
Nash_TDI is offline   Reply With Quote
Old September 1st, 2015, 11:09   #6
oilhammer
Certified Volkswagen Nut Vendor
 
oilhammer's Avatar
 
Join Date: Dec 2001
Location: St Louis
Fuel Economy: fantastic
Default

Looks good. I just lifted my B5V. Installed Rough Road suspension springs, and Bilstein HD struts. It is a 4mo, though.
__________________
oilhammer
www.cardocautomotive.com
oilhammer is offline   Reply With Quote
Old September 7th, 2015, 13:48   #7
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Purchased an aftermarket window regulator kit for the passat......what a waste of time. Anyway an oem unit will be ordered tomorrow. Also fitted a ported inlet manifold and Allard EGR delete pipe, carried out an oil and filter change and fitted new wiper blades.
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Old September 19th, 2015, 02:16   #8
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Fitted the oem regulator what a difference compared to the aftermarket one.

Also fitted a Tdi-tuning box to the car.....the increase in power is very linear making the car drive better.
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Old October 9th, 2015, 10:22   #9
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Ordered a newmans pd camshaft for the car today. It has slightly more lift over the one i have fitted in my black passat. So it should provide a bit more power����
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Old October 14th, 2015, 15:08   #10
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

My new PD cam....its a 9.5mm lift version compared to the old one of 9.31mm lift. This one will be fitted to the black Passat so that its 9.31mm cam can be sent back for repair, as there appears to be a small piece of chilled iron missing from the injector lobe. Then the returned 9.31mm lift version will be fitted to the silver Passat along with the uprated smic and hybrid turbo. I'm also looking to purchase a set of +80 DSSR nozzles from United Diesel to finish the engine off on the black passat.

__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788

Last edited by leon10tagg; October 14th, 2015 at 15:10.
leon10tagg is offline   Reply With Quote
Old November 29th, 2015, 04:50   #11
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Recently I've been spending time working on my black high line b5.5 estate refitting the gtb2260vk turbo and 9.5mm Newmans camshaft. So not much has been done on my daily silver B5.5 but it now needs a bit of work as the alternator belt tensioner has started to chatter and there is a small leak at the bottom of the rad. So both parts are on order to sort these issues. When I'm sorting these issues I'll fit the hybrid cr1756 turbo.
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Old December 22nd, 2015, 23:18   #12
TDIno
Newbie
 
Join Date: Sep 2015
Location: USA
Default

Hope you can update us about the progress of your build. have you fixed the leak problem?
TDIno is offline   Reply With Quote
Old June 21st, 2016, 22:48   #13
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Been a while but so far I've been able to source an allroad front strut brace, new drivers side door frame trims as the existing ones have spots of corrosion and 2 new wings are to be fitted. Also had to fit a new alternator clutch pulley.
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Old June 30th, 2016, 16:39   #14
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Complete set of StrongFlex bushings ordered for my silver passat to rebush the front suspension before this years Mot. Also hopefully I'll be ordering an Eibach 32mm front anti-roll bar for the car this month and then the rear beam will be braced to reduce roll at the rear.

[IMG][/IMG]
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788

Last edited by leon10tagg; December 9th, 2016 at 11:14.
leon10tagg is offline   Reply With Quote
Old July 7th, 2016, 14:24   #15
leon10tagg
Veteran Member
 
leon10tagg's Avatar
Default

Eibach anti-roll bar ordered so I've a bit of work now to do on the car for its annual mot test.
__________________
01 Golf Tdi, FMIC, CR1756 turbo, PD intake, Newman cam, EGR delete, BV, modified intake, 80mm MAF, turbo back 2.5" Milltek, 11mm IP, R520s, 3bar MAP, TD tuning box, PD130 O/C,Spax adj's, Eibach A/R bars, powerflex bushings, 312mm discs, top and bottom strut braces
04 Passat AWX, 98 Impreza turbo, 97 A4 1.8T sport
http://forums.tdiclub.com/showthread.php?t=298788
leon10tagg is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pros/Cons - Passat Wagons, B5 TDI vs. 1.8t sunvalleylaw VW B5 Passat TDIs 26 November 21st, 2014 23:29
Brake Upgrade <312mm , Audi A4 B5/Passat B5 Dankemp Upgrades (non TDI Engine related) 1 June 29th, 2013 09:12
Steel Wheels for B5 & B5.5 platform 100.00 LoneLIPumpeDuse Private TDI Items for Sale/Wanted 1 December 26th, 2007 09:52
Dealer in VA can get A5.5 pkg2's and B5 GLS Wagons ADW_squared TDI Cars for Sale/Wanted 7 September 5th, 2005 17:54


All times are GMT -7. The time now is 09:18.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2017, All Rights Reserved
Page generated in 0.17929 seconds with 13 queries
[Output: 134.64 Kb. compressed to 112.12 Kb. by saving 22.52 Kb. (16.73%)]