changing all motor/trans mounts what bolts?

B

bpjr07

Active member
Joined
Aug 19, 2013
Location
Baldwin Park
TDI
00 Jetta TDI
so i just purchaced

3 mounts,, is that all of them?
a6929
a6935
a6930

been trying to find a strechbolt kit for them but have not luck,
also am trying to find a part number to purchase the lower control arm bolt since my kmember striped i had them weld on the nut untill i can replace the k member and bolt.
thanks for the help
 
PeterV

PeterV

TDIClub Enthusiast, HO5G Doyen & Zen Master
Joined
Aug 17, 2000
Location
So, NH.
TDI
2000 Jetta 5 sp.
To assist the membership here Baldwin Park is not very helpful. Are you in the US UK?

Its a sub frame not a Chrysler k member (frame).

Suggest you look at IDparts.com Boraparts.com for correct bolt types.

Stripped is what you are referring to. There are a lot of us that have had to weld the LCA (lower control arm) bolts.
 
B

bpjr07

Active member
Joined
Aug 19, 2013
Location
Baldwin Park
TDI
00 Jetta TDI
in california US,
yes the sub frame sorry Im a chevy guy at heart lol.
i am looking in ID parts
did a search never saw that full engine mount kit thank you jokila

the bolt on my subframe is the front lower bolt, the welded or glued nut on the inside of the sub frame broke off now the bolt just spins and wobbles welded it on the the frame for the meantime, now will cut it off,,
any part number,, thank you guys

N90484004 can someone verify this is it? does not tell me which bolt it is.
 
jokila

jokila

Vendor
Joined
Dec 3, 2004
Location
Houston, Texas
TDI
2003 Jetta GLS, Manual
bpjr07 said:
in california US,
yes the sub frame sorry Im a chevy guy at heart lol.
i am looking in ID parts
did a search never saw that full engine mount kit thank you jokila

the bolt on my subframe is the front lower bolt, the welded or glued nut on the inside of the sub frame broke off now the bolt just spins and wobbles welded it on the the frame for the meantime, now will cut it off,,
any part number,, thank you guys

N90484004 can someone verify this is it? does not tell me which bolt it is.
Click to expand...

My sister's Beetle had that problem. Took it to a shop that does welding where they cut a small hole and welded the nut back in place while the subframe was still attached. They then resealed the subframe.

Here is the procedure:
http://forums.tdiclub.com/showthread.php?t=433108&highlight=subframe+nut
 
B

bpjr07

Active member
Joined
Aug 19, 2013
Location
Baldwin Park
TDI
00 Jetta TDI
B

Blackjedi

Veteran Member
Joined
Aug 15, 2014
Location
NE corner of WA state (Kettle Falls)
TDI
2000 jetta 5 speed 1.9 alh tdi
bpjr07 said:
oh haa, well i don't feel too bad on the weekends driving my corvette.:D
Click to expand...
Lucky, I have 4 gm's in the driveway that always have something wrong with them. Makes me wonder why they always have half metric and half standard... The engeneering blunders make me want to kick the guys who designed each of them in the gonads.
 
jokila

jokila

Vendor
Joined
Dec 3, 2004
Location
Houston, Texas
TDI
2003 Jetta GLS, Manual
bpjr07 said:
i bought the k member already so i will just change it out. also good time to swap all the motor mounts.
Click to expand...
But now you will also need to get an alignment as I am pretty sure the subframe is part of that. It uses TTY bolts too IIRC.
 
You must log in or register to reply here.
Top