DeliveryValve
Veteran Member
I am getting ready to replace my fuel filter and during the last replacement, I found the molded lines were starting to show some slight exterior cracks.
Before I dive into replace the filter, I'd like to get the new lines first.
The pair of molded lines that need to be replaced is VW part number 3B0130295AA and cost about $50-$60.
Photo courtesy of club member blechale
The alternative is using bulk 5/16 fuel line, any objections to this? Or am I going to be annoyed with the lines flopping all over the place because the molded bends are critical?
.
Before I dive into replace the filter, I'd like to get the new lines first.
The pair of molded lines that need to be replaced is VW part number 3B0130295AA and cost about $50-$60.
Photo courtesy of club member blechale
The alternative is using bulk 5/16 fuel line, any objections to this? Or am I going to be annoyed with the lines flopping all over the place because the molded bends are critical?
.