Dan Clarke
Veteran Member
- Joined
- Jul 7, 2000
- Location
- Watsonville CA
Hi,
There's a plug on the drivers end of my '99 ALH tdi injector pump that just started leaking. It's a little over an inch in diameter and needs a three sided socket for removal. Has a smaller hex bolt in it's center.
I need to know if removing it will disturb anything, and I need to know if it's seal is a plain "O" ring or some dedicated seal.
I'd sure appreciate benefitting from the experience here as I've been searching the past threads for hours and found nothing about this particular leak location.
Got a timing belt job due in 5000 miles so I will replace all other seals at that time. Just need to get this leak stopped.
Thanks,
Dan
There's a plug on the drivers end of my '99 ALH tdi injector pump that just started leaking. It's a little over an inch in diameter and needs a three sided socket for removal. Has a smaller hex bolt in it's center.
I need to know if removing it will disturb anything, and I need to know if it's seal is a plain "O" ring or some dedicated seal.
I'd sure appreciate benefitting from the experience here as I've been searching the past threads for hours and found nothing about this particular leak location.
Got a timing belt job due in 5000 miles so I will replace all other seals at that time. Just need to get this leak stopped.
Thanks,
Dan