4 cylinder P7100 where?

WarmStart · Jul 1, 2017

Hello.

I hope this is right plays for my post.

On which engines/cars/trucks/tractors... (common in Europe) I can find The BOSCH 4 cylinder P7100 pump.

Thanks in advance

mk1-83 · Jul 1, 2017

You whant to p pump a tdi

All Stock · Jul 1, 2017

Your really looking for a Bosch P3000

WarmStart · Jul 2, 2017

NO I am looking P7100.

I need it to my tractor engine.

raffshore · Jul 2, 2017

WarmStart said:
Hello.

I hope this is right plays for my post.

On which engines/cars/trucks/tractors... (common in Europe) I can find The BOSCH 4 cylinder P7100 pump.

Thanks in advance

cummins 4BT

All Stock · Jul 2, 2017

4BT's also had the P3000 pumps along with VE's

Machineman · Jul 2, 2017

P 7100 4 cylinder pumps are very rare I once seen one on eBay going for $3,000 aside from that I've never seen one before a Bosch A pump should be sufficient that is what i ran on my MK2 alh

Machineman · Jul 2, 2017

[486] · Jul 3, 2017

small picture, that is either M or A pump, hex DV holders it is A, splined, M

mercedes 4cyl have M and MW pump, you can fit 10mm elements from international DT
p is very rare on 4bt, most larger 4/8 cyl engines here were unit injector
many tractors have A pump

andy2 runs an 8cyl pump with half the elements blocked off because of the rarity of 4cyl P pumps, which says something as 8cyl pumps are also very uncommon

[486] · Jul 3, 2017

WarmStart said:
NO I am looking P7100.

I need it to my tractor engine.

You already have one and are looking for a rebuilt one to keep your tractor running?

Call up your local pump shop and plan with them for a quick turnaround, remove it and bring it to them to rebuild. The cost of another pump will be far far far away more than the downtime.

WarmStart · Jul 3, 2017

That is the problem I do not have this pump.
I am building tractor pulling engine. The P7100 is the right thing what I need just I don't know where to find it.

andy2 · Jul 3, 2017

Alibaba has them,Not sure about the quality.They will possibly take an offer on their items as well.They have RSV and RQV governors and 12 or 13mm plunger I think.From what I can tell they are pretty desperate for sales currently.

https://wholesaler.alibaba.com/product-detail/P7100-Pump-4CYL-13MM-PLUNGER-12MM_60351536918.html

Machineman · Jul 3, 2017

That's a good find Andy I wonder if oem Bosch elements with fit in it

KERMA · Jul 4, 2017

go sigma or go home

Machineman · Jul 4, 2017

KERMA said:
go sigma or go home

10 grand later....

senso · Jul 4, 2017

Ebay?
Just searched for P7100 in ebay and got lots of hits:

http://www.ebay.com/itm/p7100-injection-pump-/182649434643
http://www.ebay.com/itm/BD-Diesel-P...-1994-1998-RAM-2500-L6-5-9-1994-/182640793901
http://www.ebay.com/itm/BD-Diesel-P...-1994-1998-RAM-2500-L6-5-9-1994-/201967579544
http://www.ebay.com/itm/CUMMINS-P7100-DIESEL-INJECTION-PUMP-3921923-0402-736-847-/221513534287
http://www.ebay.com/itm/Industrial-...6-98-Dodge-Diesel-215HP-5-Speed-/110828003367
http://www.ebay.com/itm/Dodge-94-98-Industrial-Injection-p7100-Dragon-Fly-Pump-/110361785647
http://www.ebay.com/itm/Bosch-Cummins-5-9-P-pump-P7100-887-215hp-core-pump-/142421231880

From 600 to 2k $, all in the first half of the first page.

All Stock · Jul 4, 2017

Yeah but not one of them is for a 4 cylinder, you will be extremely lucky to find one. Like 486 said they are very rare.

senso · Jul 4, 2017

Block two outlets and get a "cam" custom made, if they are as rare as people say, might be "cheap" to go that way.
Or send Dieselmeken a pm, maybe he knows where to discover one.

[486] · Jul 4, 2017

senso said:
Block two outlets and get a "cam" custom made, if they are as rare as people say, might be "cheap" to go that way.

rofl

reeeeal simple

Machineman · Jul 4, 2017

Four-cylinder version is already too big almost the length of a TDI block the six cylinder pump would be comical

hatemi · Jul 4, 2017

We found a p style pump made with bosch licence that was from Yanmar marine diesel with 240hp. IIRC it had either 10.5mm plungers and 11mm lift or vice versa. I might be able to still source it as it enend up on the shelf and not installed.

Lähetetty minun Moto G (4) laitteesta Tapatalkilla

senso · Jul 4, 2017

Its this, or similar?
http://www.ebay.com/itm/3283694-Cum...-more-Injection-pump-F002A0Z032-/281810859698

Rub87 · Jul 5, 2017

i have some similar looking pump from a benz 314 engine. I think its A or M pump, if that would be of any use..

senso · Jul 5, 2017

I'm asking if thats the type of pump, because I have a friend that is a "bit" into those things and I will ask him if he knows about anything similar that is for sale.

WarmStart · Jul 5, 2017

senso said:
I'm asking if thats the type of pump, because I have a friend that is a "bit" into those things and I will ask him if he knows about anything similar that is for sale.

This is A- type pump.
P7100 is this: http://www.ebay.ie/itm/NEW-OEM-Cumm...ction-Pump-Turbo-4B-3-9-injector/272219461567

P3000 is similar pump.
7100 has plugs on the bottom 3000 flat plate.

[486] · Jul 5, 2017

senso said:
I'm asking if thats the type of pump, because I have a friend that is a "bit" into those things and I will ask him if he knows about anything similar that is for sale.

look at the barrels and DV holders for the glaring clues re A, M, MW, P

TDIMeister · Jul 5, 2017

If one sees how much CR injectors and HPFP's cost, $2,500 for that eBay specimen is a deal if you can't get one anywhere else and you REALLY need it.

andy2 · Jul 6, 2017

Here is the same pump but made to be on the left side of the engine.So this one could be used on the vw for example.

https://wholesaler.alibaba.com/prod...03.html?spm=a2700.7765678.1998649852.1.lNatSl

I'm curious to know what engine that the op is planning on using the p7100 ?

My 8 element p3000 now has 8 DLC coated 13mm plungers in it and 5x.022" nozzles.

[486] · Jul 6, 2017

Are you teeing the lines together now, as was discussed a while ago?

Update your thread, always neat to see.

andy2 · Jul 6, 2017

Yup,It seems to be working so far.Also now upping the HP turbine exducer from 65mm to 68mm.

I'll update my thread sometime sooner than later regardless of weather or not its a success

4 cylinder P7100 where?

Well-known member

Veteran Member

Veteran Member

Well-known member

Well-known member

Veteran Member

Veteran Member

Veteran Member

Top Post Dawg

Top Post Dawg

Well-known member

Veteran Member

Veteran Member

Vendor , w/Business number

Veteran Member

Well-known member

Veteran Member

Well-known member

Top Post Dawg

Veteran Member

Veteran Member

Well-known member

Top Post Dawg

Well-known member

Well-known member

Top Post Dawg

Phd of TDIClub Enthusiast, Moderator at Large

Veteran Member

Top Post Dawg

Veteran Member