afn fuel temp sensor

intermittant to ground fault code ,,, 8 pin connector checking wiring no obvious damage , i believe there are 2 wires to temp sensor could do with a schematic of connector , and colours of wires and anything else that might be useful

way forward anyone .
tia

Bummer, I gave it a shot, some body help him. Don't leave him hanging.

I believe AFN is like the ALH and has the fuel temp sensor inside the pump. It is not too bad to change, but you have to pull the top cover off the pump. This is a common problem with ALH, so likely the same for AFN.

You'll need to remove the security triangle bolt, purchase a new sensor and gasket.

many thanks , sorted sensor but later in day low compression on 1 cyl = 380 psi on 3 cyl and 160 psi on worse . so without stripping engine how to free the rings up .. anyone with some good suggestions most welcome