www.tdiclub.com

Economy - Longevity - Performance
The #1 Source of TDI Information on the Web!
Forums Articles Links Meets
Orders TDI Club Cards TDIFest 2016 Gone, but not forgotten VAG-Com List Unit Conversions TDIClub Chat Thank You




Go Back   TDIClub Forums > VW TDI Discussion Areas > OBD Scanners

OBD Scanners Discussions on using On Board Diagnostic (OBD) scanners/ Diagnostic Equipment related to TDIs

Reply
 
Thread Tools
Old September 7th, 2017, 04:38   #46
CRD4me
Veteran Member
 
Join Date: Apr 2014
Location: Canada
Default

Anybody ?
Are the numbers I'm seeing when doing the test are in normal range (from 0 to 22 and back at 0...etc...)
Thanks for the assistance.
CRD4me is offline   Reply With Quote
Old December 7th, 2017, 19:50   #47
Fix_Until_Broke
Veteran Member
 
Fix_Until_Broke's Avatar
 
Join Date: Aug 2004
Location: Menomonee Falls, Wisconsin, USA
Fuel Economy: 75.0/53.0/38.4
Default

Is there a VCDS measurement of the actuator position sensor on the BRM's?

Seems like you should be able to cycle the actuator and read the actuator position sensor to see if you have sticky vanes or not? I looked all over in measurement blocks, but didn't see anything that looked even kind of close.

Trying to help a co-worker on his 06 beetle TDI.
__________________
03 Jetta, Cat 2u, DG Steel SP w/MOGolf Mod, 3"DP, 4"EXH, EaBP100 Bypass, Euroswitch, ECodes, Driving Light, PD Lift Pump, R520's, RC5,RC6, TDTuning, Malone, ScanGaugeII, 3" TIP, 2" TOP, HE221W Compounded with GTC1444VZ, 6 Bar MAP, VR6 MAF, Vented Fender Liner, Battery Cover Mod, 11mm, Monster Mats, 215/55/17 (27.9/53.0/75) Monthly MPG Links, Euro Trunk Latch, IDParts RSB, SDI or ALH Intake, ARL Ceramic Pistons, Rosten Rods, DRW, Wavetrac, SBC, FSD's, Beef Springs, Rebuilt Head, Recaro's, Colt II, DG Sigma 6, RMT200
Fix_Until_Broke is offline   Reply With Quote
Old December 9th, 2017, 05:46   #48
DanG144
Veteran Member
 
Join Date: Aug 2007
Location: Chapin, South Carolina, USA
Default

There is one. Look at block 43, field 1 is N75 duty cycle, field 2 is turbo actuator vane position. This is not documented by VW (anywhere I can find). it was documented by myself and Dan Schein in a very handy expanded label file.

I cannot guarantee this works on all PD engines, but it does on most.
DanG144 is offline   Reply With Quote
Old December 9th, 2017, 05:56   #49
DanG144
Veteran Member
 
Join Date: Aug 2007
Location: Chapin, South Carolina, USA
Default

Here is a link to this file.

http://freetexthost.com/p2a6df1hqx
DanG144 is offline   Reply With Quote
Old December 10th, 2017, 12:26   #50
Fix_Until_Broke
Veteran Member
 
Fix_Until_Broke's Avatar
 
Join Date: Aug 2004
Location: Menomonee Falls, Wisconsin, USA
Fuel Economy: 75.0/53.0/38.4
Default

Thanks - I didn't go that high up in the measurement blocks.

I'll pass this on to him, otherwise I'll look into it next week when I'm back in the country

Thanks again
__________________
03 Jetta, Cat 2u, DG Steel SP w/MOGolf Mod, 3"DP, 4"EXH, EaBP100 Bypass, Euroswitch, ECodes, Driving Light, PD Lift Pump, R520's, RC5,RC6, TDTuning, Malone, ScanGaugeII, 3" TIP, 2" TOP, HE221W Compounded with GTC1444VZ, 6 Bar MAP, VR6 MAF, Vented Fender Liner, Battery Cover Mod, 11mm, Monster Mats, 215/55/17 (27.9/53.0/75) Monthly MPG Links, Euro Trunk Latch, IDParts RSB, SDI or ALH Intake, ARL Ceramic Pistons, Rosten Rods, DRW, Wavetrac, SBC, FSD's, Beef Springs, Rebuilt Head, Recaro's, Colt II, DG Sigma 6, RMT200
Fix_Until_Broke is offline   Reply With Quote
Old December 14th, 2017, 13:51   #51
BobnOH
not-a-mechanic
 
Join Date: May 2004
Location: central Ohio
Fuel Economy: 50/45/35
Default

Quote:
Originally Posted by DanG144 View Post
Here is a link to this file.

http://freetexthost.com/p2a6df1hqx
Quote:
Originally Posted by DanG144 View Post
There is one. Look at block 43, field 1 is N75 duty cycle, field 2 is turbo actuator vane position. This is not documented by VW (anywhere I can find). it was documented by myself and Dan Schein in a very handy expanded label file.

I cannot guarantee this works on all PD engines, but it does on most.
Well now that's some cool stuff!!
BobnOH is offline   Reply With Quote
Old December 15th, 2017, 12:58   #52
DanG144
Veteran Member
 
Join Date: Aug 2007
Location: Chapin, South Carolina, USA
Default

Dan Schein did 99% of the work on that file; I only contributed the one block. I try to keep a copy handy.
DanG144 is offline   Reply With Quote
Old July 16th, 2018, 15:26   #53
rockyrunner99
Veteran Member
 
Join Date: Aug 2009
Location: Grand Rapids, Mi
TDI(s): 99.5 Golf
Default

I realize this is an old post, but quick question, when talking about vacuum, some used units of inhg, some mmhg, which is correct?
rockyrunner99 is offline   Reply With Quote
Old July 17th, 2018, 11:49   #54
Matt-98AHU
Loose Nut Behind the Wheel Vendor
 
Matt-98AHU's Avatar
 
Join Date: Apr 2006
Location: Vallejo, CA
Default

Quote:
Originally Posted by rockyrunner99 View Post
I realize this is an old post, but quick question, when talking about vacuum, some used units of inhg, some mmhg, which is correct?
Depends on what your vacuum gauge is displaying. Both are fine so long as you know how to convert between the two.
__________________
Sole Proprietor, Diesel Autowerks in San Anselmo, CA. One man operation, email is preferred method of contact: email me with inquiries for service.
Matt-98AHU is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS>>>>>Jetta 4 R-Series Rear Bumper and side skirts chris_frost Private TDI Items for Sale/Wanted 3 February 9th, 2009 16:20
If Yer Lookin For A Tdi>>>>>>>>>>>> LiLredTDI Eastern USA 13 July 27th, 2008 15:38
timing belt tensioner >>>>>>>>>> melanie VW B5 Passat TDIs 4 November 12th, 2007 15:13
I.T. CAREER NEEDED IN CANADA>>>>>>>>>>>> mojogoes Mid-west USA 12 January 28th, 2005 10:17
ALLARD INLET MANIFOLD >>>>>>>>>>>>>>>>>>>>>>>> mojogoes TDI Power Enhancements 5 November 8th, 2004 09:28


All times are GMT -7. The time now is 09:00.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright - TDIClub Online LTD - 2017
Contact Us | Privacy Statement | Forum Rules | Disclaimer
TDIClub Online Ltd (TDIClub.com) is not affiliated with the VWoA or VWAG and is supported by contributions from viewers like you.
1996 - 2017, All Rights Reserved
Page generated in 0.15418 seconds with 13 queries
[Output: 97.45 Kb. compressed to 84.34 Kb. by saving 13.11 Kb. (13.45%)]