MK4 ABS Sensor Harness at wheels

The ABS light recently popped up on the dash on my 2000 Golf TDI. I scanned with Vag Com, and found that i had a bunch of codes relating to my Front Right ABS sensor. So I pulled the right front wheel and found that the thick rubber wire (that connects from the ABS sensor in the hub assembly, then clips into the shock absorber, and then goes into the fender liner) was chaffed open and the two small wires were both exposed and touching. I attempted to cut the wires down and so that I could just reconnect them with some new wiring, but the wires are so brittle that every time that I try to do anything with them, they just crack more. I searched but could not find the Harness for this anywhere. Does anyone happen to know the part number for the right front ABS sensor Harness for a MK4 Golf, or know where I could buy one?

Any help is much appreciated
-Brad

Pull the pins out of the connector and rebuild that part of the harness. Make sure that you soder the connections and use waterproof heat shrink

1j0927903e

Just out of curiosity I did a search on the above part number and found this: http://www.idparts.com/catalog/product_info.php?products_id=3039