GECKO 5
Veteran Member
Hi all,
I am going to replace the sensor tomorrow. I took a look at it last night and it looks "Fairly" straight forward....
My bentley gives no instruction on it so i was hoping to get some feedback here on the replacement before begining...
From what i can tell, the steps are :
- Drain coolant (From what i can tell)
- Remove air filter/duct to gain better access
- Remove the C-clip holding the sensor
- Disconnect from wiring
- Replace sensor
- Reverse process.
Clear Codes (Had a code P0128 on this).
1 - Anything i should be weary of before begining?
2 - I ensured that i got the "Green" sensor as i understand this is the new model
3 - I ensured that i got a new O-ring
Cheers,
I am going to replace the sensor tomorrow. I took a look at it last night and it looks "Fairly" straight forward....
My bentley gives no instruction on it so i was hoping to get some feedback here on the replacement before begining...
From what i can tell, the steps are :
- Drain coolant (From what i can tell)
- Remove air filter/duct to gain better access
- Remove the C-clip holding the sensor
- Disconnect from wiring
- Replace sensor
- Reverse process.
Clear Codes (Had a code P0128 on this).
1 - Anything i should be weary of before begining?
2 - I ensured that i got the "Green" sensor as i understand this is the new model
3 - I ensured that i got a new O-ring
Cheers,