Body Kit?

3L3M3NT

Veteran Member
Joined
Jun 16, 2008
Location
Sturgeon Bay, WI
TDI
04 Jetta GLS TDI, 04 RTDI
Looks pretty good, but it would be nice to hear from some people that have real world experience with the kit.

I'm assuming that you have a Golf if you are looking at that kit?

To get some other opinions I would post this on the Vortex, since there are probably people that may have installed this kit and tried it out and can tell you yeh or neh.

http://www.vwvortex.com/
 

Powder Hound

Top Post Dawg
Joined
Oct 25, 1999
Location
Under a Bridge, Crestview, FL, USA
TDI
'00 Golf 4dr White 5sp, '02 Jettachero 5sp, Wife's '03 NB Platinum Gray auto(!)
If the pieces are made in urethane, then they should work out OK. You'd just have to make sure you prep well for painting: sand it completely, use a good solvent (liek acetone) to get the parting compound off the surface, then sand it some more and make sure the paint shop uses an adhesive promoter to make sure the paint sticks.

Good luck and let us know how it goes if you decide to go with it.
 
Top