krystlelite81
TDIGUY Associate Vendor
Hi everyone...We just did a pretty big job on a customer's 06 Jetta (BRM). PD150 Bosio Nozzles, Billet cam and new lifters, and a tune. We did the cam and lifters because the car had a worn cam and the center of one lifter had popped out (compression has since been checked and is 500psi on all 4 cylinders) and then had the injectors rebuilt shortly after because they were contaminated with bad bio (customer runs B99). Prior to the rebuilt injectors and tune the car ran but was getting poor fuel economy and two of the injector values in field 13 were way off from the other two. There were no issues with a rough idle at this time. Since the injectors and tune the idle bounces around from 740-861. The customer has complained of the car having hard starts (7-8 times to get it started) and the car is stalling at idle, at a light, after its been running for some time. Torsion value has been upped to 3.4 and we have tried to up it more but when we do that it shows 0.0KW. Each injector is within .02 of each other on field 13 (2.99; -3.01; -2.99; 3.01) and field 23 shows .40-.50 for injectors 1-3 and injector 4 is around .20-.30.
Any suggestions or help would be greatly appreciated!!!
Any suggestions or help would be greatly appreciated!!!