Red Aluminum Start Button Switch 2013 Beetle

Parva

Well-known member
Joined
Mar 17, 2010
Location
Port Hueneme, CA
TDI
Now have a '13 Beetle Turbo, had a '10 Jetta Sportwagen TDI
So, I got the idea to replace (cover) the factory silver push button start/stop switch and it's black circular trim.
Apparently, all the ones I've found so far are all too small.
I see lots of examples listed on eBay & Amazon & AliExpress but they all appear to be the wrong size -- too small or don't list the size at all.

I measured & re-measured mine at the following sizes: The outer diameter of the black trim ring is 36mm wide & it's inner diameter is 28mm. The actual button is 25mm wide.

An example of what I'm looking for is this one at Amazon: https://www.amazon.com/gp/product/B0...13I4MKHG&psc=1 but its too small.
The ones online (again, the ones I've found), that list their dimensions have the following size: outer diameter of the trim ring is 29mm wide & it's inner diameter is 25mm. The button cover is 23mm wide.

Have you a place that sells the correct size?
 

DivineChaos

Top Post Dawg
Joined
Jul 27, 2019
Location
Minnesota
TDI
mk6 jetta sportwagen tdi
its just like wheel center caps. these guys arent the best at measuring. its most likely the right one. its not like its too expensive if it is the wrong one. just return it.
 
Top