Turbo being installed:
`ARL` PD injectors were used. (stock PD injectors for ARL engine)
FMIC was installed. FMIC that I supplied (Twin Pass FMIC from DarkSide) did not fit so we got this:
Exhaust end is still stock, downpipe is same or slightly larger diameter if I am correct.
Inspiration was the 212 HP Lupo
https://www.facebook.com/vanvughttuning/posts/1311191472248203
My (then still) chipped BNM versus the Lupo
https://3lvrienden.nl/viewtopic.php?f=32&t=2691 that has more mods like the water-intercooler and larger injectors.
Please mention my name when visiting VVT.
Drivability:
I picked up the VW Fox last friday so the new 'feel' of the car has to sink in, still.
I do not really feel any problematic lag compared to the chipped car, but it might depend on what you are used to and/or how you drive the car.
Going from 0-100m KM/h feels quite fast when just using 3rd gear to reach 100 KM/h at ~ 4K rpm, but that is of course because I am used to the chipped Fox.
More driving is needed to evaluate the changes.
Sorry for the larger pics but imgur links for the smaller versions do not really work...